Power Amplifiers

Most Popular

Name: A to Z

Name: Z to A

Price: Low to High

Price: High to Low

Average Customer Rating

Default Dev Script Validation

Default Header After Global Promotions

The DSP3-150 is the ideal amp for situations where a passive subwoofer and multi-speaker channels are required. The dedicated 300w 8-ohm subwoofer channel has ample power to push passive subwoofers to their peak.

Origin Acoustics® Power Amplifier

Origin Acoustics has made a conscious choice to pursue three-channel amplifiers as our preferred solution for installations that involve multiple in-line full-range speakers and passive subwoofers. By giving the subwoofers their own dedicated channel, not only is there more control over the environment, but one additional subwoofer can be added to the channel without impedance restrictions.

This amplifier has an easy-to-use control knob and front-facing panel. Preloaded with DSP settings for our most popular configurations and loudspeakers, this amplifier is a must-have when installing 8-ohm outdoor audio or in-ceiling sub/sat systems.

The amplifier is on when you need it and off when you don’t. The DSP3-150 is turned on out of standby mode either by sensing the audio signal from a preamp or receiver or by a 12-volt signal from any number of components.

The input channel features a stereo loop out to ensure connection to other amplifiers is straightforward and easy.

Built-in circuits that sense both thermal overload or a short-circuit in the speaker connections, will shut down the amplifier until the temperature level returns to normal operating levels or the short in the connections is corrected. This protects the amplifier from permanent damage and avoids costly service visits and repairs.

The DSP2-200 provides uncolored, clean amplification to loudspeakers rated from 4-ohms and up. It contains preset DSP curves for Origin Acoustics products and is ready for installation into a rack or inside a cabinet.

The DSP2-200 provides ample power in a small frame. With an easy to operate rotary dial for DSP control, and 200w of power on each channel, these are ideal for 8-ohm landscape, subwoofers, or stereo listening.

Half rack width and 1U height make it easy load four of these into roughly the same space as a single traditional amplifier.

The MCA 525 GEN 2, MCA 325 GEN 2 and MCA 225 GEN 2, designed and Crafted in Canada, are like no other amplifiers in the world: custom low noise high-power toroidal transformers; high-current bipolar output transistors; high-quality filter capacitors; adva

Anthem® MCA 325 Gen 2 3 Channel Power Amplifier 

What does it take to improve on perfection? Over 15 years of concentration. The distillation of endless hours of fundamental research. The willingness to rebuild from the ground up. And the focus on a single goal: Leadership through innovation and technology. Introducing the new generation of Anthem MCA GEN 2 Amplifiers, designed, engineered and Crafted in Canada!

The new MCA GEN 2 series greatly reduces the use of internal cabling for a much smoother circuit path for pure, unobstructed audio performance. The use of low-flux toroidal transformers and improved input transistors provide a greater sense of transparency, even with dynamically complex material.

We’ve also improved other performance benchmarks including power bandwidth and slew rate. With a signal-to-noise ratio of 120 dB, background noise is practically nonexistent, leaving you with just pure natural sound reproduction.

While most 5-channel amplifiers use a single power supply for front left and right channels and another power supply of the centre and surround, the new MCA 525 GEN 2 shares its two power supplies between all channels. The result is full bursts of power – instantly – without affecting channel separation.

The new MCA GEN 2 Amplifiers use Anthem’s years of experience to “engineer out” common amplifier gremlins.

In addition to the reduced inrush current, these new MCA GEN 2 Amplifiers only use between 1-2W in “standby” mode. As with all Anthem amplifiers, they can be switched on manually, via trigger, or by sensing an input signal. New, larger, more conductive audiophile binding posts have been added to maximize contact and maintain a firm grip on the speaker cable. If you’re in the market for cutting-edge audio component separates, Anthem’s new MCA GEN 2 Amplifiers balance the complex dynamics of today’s most demanding multi-channel media with the rare finesse required to satisfy the audiophile in you. MCA GEN 2 Amps provide an abundance of conservatively rated power into demanding low impedance loads, incredible reliability, and a new design aesthetic that matches our sleek new AVM A/V Processors.

Next generation Advanced Load Monitoring™ Technology

Exclusive ALM™ technology monitors internal temperature, current and voltage to ensure safe and uninterrupted longterm operation, all the while eliminating the need for internal fuses. ALM™ is not in the signal path, so it never gets in the way. Instead, ALM engages instantly, but only in the most extreme circumstances, to protect your amplifier (and speakers) from damage.

This new generation ALM™ lowers the chance of a line fuse blowing during an over-current condition. Should a fault condition arise, unaffected channels continue to play and all-channel operation resumes automatically once conditions are back to normal. The LED on the front panel confirms status at all times.

At Anthem, we have one simple goal – to design, engineer and manufacture audio/video products that deliver premium performance and convenience at a reasonable price. We do this by spending thousands of hours selecting and testing components, carefully designing our own circuit topologies, and backing them with robust power supplies that ensure maximum long-term quality and reliability. We achieve this with our team at the Paradigm/Anthem Research Center and their decades of combined experience.

Today’s premium home theaters need support for as many as 15 speakers and 4 subwoofers to handle the latest Dolby Atmos and DTS:X object-oriented audio codecs. Pair an AVM 70 or AVM 90 A/V Processor with a stack of MCA amplifiers and you’ll hear sound that rivals the best commercial cinemas.

MCA’s scalability means you can purchase only the channels you need to power your vision of home entertainment. AVM Processors can now manage configurations up to 15.4 channels (up from 11.2) with ARC Genesis Room Correction ensuring the best possible sound at every seat. And you won’t need to hide your gear from view.

Anthem’s modernized design extends to every component in the MCA and AVM lines. All MCA power amps are Crafted in Canada.

MCA amplifiers deliver incredible dynamics thanks to massive “audiophile approved” conservatively rated power supplies designed with high rail voltages.

Low flux toroidal power transformers ensure ultra quiet performance by minimizing stray magnetic field radiation. This provides the pure, clean, low-noise power that is needed to reproduce the full dynamics of home theater and the most complex and dynamic music recordings.

Our own custom-designed, oversized robust binding posts ensure full power delivery at all times.  They’re easy to use and facilitate large speaker cable connectors.

The MCA 525 GEN 2, MCA 325 GEN 2 and MCA 225 GEN 2, designed and Crafted in Canada, are like no other amplifiers in the world: custom low noise high-power toroidal transformers; high-current bipolar output transistors; high-quality filter capacitors; advanced power supply regulators; oversized aluminum heatsinks; custom-designed dual binding posts; and patented auto-on/off circuitry. Superior craftsmanship that is reflected in clean, clear, audiophile-quality sound from top to bottom of the frequency spectrum.

 Available in 5, 3 and 2-channel configurations, these new MCA amplifiers feature more robust and efficient power and heavy-duty reliability. The new MCA Series delivers lower THD (total harmonic distortion) for more clean, pure sound and lower noise for 

Anthem® MCA 525 GEN 2 5 Channel Power Amplifier 

While most 5-channel amplifiers use a single power supply for front left and right channels and another power supply of the center and surround, the new MCA 525 GEN 2 shares its two power supplies between all channels. The result is full bursts of power – instantly – without affecting channel separation.

The new MCA GEN 2 Amplifiers uses of Anthem’s years of experience to “engineer out” common amplifier gremlins.

Our own custom-designed, oversized robust binding posts ensure full power delivery at all times. They’re easy to use and facilitate large speaker cable connectors.

Backed by over 35 years of home-grown, hands-on design, and innovative audio engineering experience, Anthem products provide an unprecedented level of reliability and functionality; delivering one of the industry’s highest performance/price ratios. This is just one reason why Anthem electronics are the choice of knowledgeable audiophiles, professional musicians and engineers the world over.

 Available in 5, 3 and 2-channel configurations, these new MCA amplifiers feature more robust and efficient power and heavy-duty reliability. The new MCA Series delivers lower THD (total harmonic distortion) for more clean, pure sound and lower noise for a supremely quiet background.

Available in 5, 3 and 2-channel configurations, these new MCA amplifiers feature more robust and efficient power and heavy-duty reliability. The new MCA Series delivers lower THD (total harmonic distortion) for more clean, pure sound and lower noise for a

Anthem® MCA 225 Gen 2 2 Channel Power Amplifier 

Available in 5, 3 and 2-channel configurations, these new MCA amplifiers feature more robust and efficient power and heavy-duty reliability. The new MCA Series delivers lower THD (total harmonic distortion) for more clean, pure sound and lower noise for a supremely quiet background. 

Anthem® MCA 525 GEN 2 Black 5 Channel Power Amplifier 

Anthem® MCA 325 Gen 2 Black 3 Channel Power Amplifier 

Anthem® MCA 225 Gen 2 Black 2 Channel Power Amplifier 

The Klipsch KDA Series DSP Amplifiers offer legendary Klipsch power and performance in a sleek, high-tech, 1 rack unit solution. The KDA- 500 offers 500W of class G/H power, for clean, dynamic power in any type of install.

Klipsch® KDA Series KDA-500 DSP Amplifier

The Klipsch KDA Series DSP Amplifiers offer legendary Klipsch power and performance in a sleek, high-tech, 1 rack unit solution. The KDA-500 offers 500W of class G/H power, for clean, dynamic power in any type of install.

From small residential systems to massive commercial installs, the Klipsch KDA-500 is designed for maximum install flexibility – offering low impedance and 70V/100V compatibility for distributed line applications. These impedance settings are fully independent from channel to channel – so an installer can run one channel low impedance with another channel 70V/100V for full customization and optimization of their system.

The KDA-500 boasts fully matrixed 4x4 I/O with fully balanced Phoenix connector inputs and Phoenix speaker outputs capable of connecting up to 12-gauge wire. For non-balanced connections, RCA inputs and outputs (throughs) are also built-in, making the KDA-500 one of the most flexible power solutions on the market today.

The myriad I/O, impedance, and acoustic settings are fully matrixed and customizable through the web-based DSP menu - simply plug in a laptop computer to the RJ-45 port on the back panel of the amplifier, enter the assigned IP address into your favorite web browser to pull up the easy-to-use, streamlined menu page. In addition to password protected channel assignments, gain settings, EQ, and limiting, the DSP provides presets for almost every Klipsch speaker on the market – optimizing acoustic performance and power handling for these products with a single click. Accessing the DSP wirelessly with a tablet, smartphone, or computer is also quick and easy when the KDA amplifier is plugged into the network’s wireless router.

Part Numbers

Amplifier Type

Amplifier Power

Outputs

Input Sensitivity

Input Impedance

Signal-To-Noise

Rack Unit

Product Dimensions

Mounting Options

Built From

Balanced

Unbalanced

Front Face

Case

For outdoor systems requiring more output, the Klipsch KDA-1000 DSP Amplifier powers larger arrangements to deliver incredible performance from a 1000W, single-rack unit solution - all completely customizable through the web-based DSP menu.

Klipsch® KDA Series KDA-1000 DSP Amplifier

The Klipsch KDA Series DSP Amplifiers offer legendary Klipsch power and performance in a sleek, high-tech, 1 rack unit solution. The KDA-1000 offers 1000W of class G/H power, for clean, dynamic power in any type of install.

From small residential systems to massive commercial installs, the Klipsch KDA-1000 is designed for maximum install flexibility – offering low impedance and 70V/100V compatibility for distributed line applications. These impedance settings are fully independent from channel to channel – so an installer can run one channel low impedance with another channel 70V/100V for full customization and optimization of their system.

The KDA-1000 boasts fully matrixed 4x4 I/O with fully balanced Phoenix connector inputs and Phoenix speaker outputs capable of connecting to 12-gauge wire. For non-balanced connections, RCA inputs and outputs (throughs) are also built-in, making the KDA-500 one of the most flexible power solutions on the market today.

The KA-1000-THX subwoofer amplifier is the powerful driving force behind the new Klipsch THX® Ultra2 system. This model offers rock-solid dependability under the most demanding conditions and allows listeners to experience all the power, detail and emotio

Klipsch® KA-1000-THX Subwoofer Amplifier

Can support two high performance subwoofers

Finished in black with a machined aluminum front panel and knobs

This full-featured Class D amplifier, which can be conveniently located near the rest of the installation's electronics, has a built-in, defeatable, low-pass crossover and level control, boundary-gain compensation switch, completely variable phase control, and an auto power function. This high-performance amplifier has a massive toroidal power supply that can deliver 1000-watts into a 4 Ohm load. It can also support two high performance subwoofers and has a left and right RCA pass-through.

Finished in black with a machined aluminum front panel and knobs, the KA-1000-THX uses professional style NL2 Speakon® outputs for the high current transfer of power to the subwoofer.

The KA-1000-THX delivers a combination of flexibility, reliability and sound quality that is unmatched.

The KA-1000-THX subwoofer amplifier is the powerful driving force behind the new Klipsch THX® Ultra2 system. This model offers rock-solid dependability under the most demanding conditions and allows listeners to experience all the power, detail and emotion of their favorite music and movies.

Frequency Response

Enclosure Type

Amplifier

Auto Power On

Low Pass Crossover

Inputs

Phase

Finish

Voltage

Export Voltage

Key Features

FTC Rated Power

Dynamic Power

By design, P2 and P5 amplifiers are powerful independent “mono block” amplifiers. Each channel is self-contained on its own glass-epoxy circuit board and heatsink and benefits from an independent power supply. Since there is no common audio path between c

Anthem® Statement P Series 5 Channel Power Amplifier

In life we admire “heart.” When we say someone has heart we mean passion, spirit, fortitude. And we applaud it. While the amplifier is the brawn behind every successful music and movie presentation, it is also the heart! Its role is as crucial as that of the speakers in its ability to render delicate musical detail one moment and deliver room-shaking explosions the next. The most exquisite piece of music falls flat without clean, quiet power to sustain it through to its natural, musical ebb. Movie special effects require an inordinate supply of stable, high current power to give visceral credibility to the “special” aspect of each effect! In fact, all truly successful sound reproduction requires “heart.” The heart of an amplifier rests with its design and it is here that P2 and P5 amplifiers reveal their high-end lineage: multi-layered, hand-designed circuit boards with thick copper traces; rugged, independent power supplies with tuned toroidal power transformers for each amplifier channel; fourteen rugged bipolar output devices per channel; custom-designed convection-cooled heatsinks with serrated fins; a “no-fuse” design strategy. And the list goes on.

By design, P2 and P5 amplifiers are powerful independent “monoblock” amplifiers. Each channel is self-contained on its own glass-epoxy circuit board and heatsink and benefits from an independent power supply. Since there is no common audio path between channels there is a complete absence of crosstalk.

Frequency-response channel matching is superb. The musical picture is seamless and exquisitely detailed with a multichannel soundstage that is astonishingly transparent, cohesive and three dimensional.

Cascoded Complementary Feedback Input Stage

P2 and P5 amplifiers benefit from our proprietary input topology—a unique departure from the classical differential input stage. Eight low-noise bipolar input devices, hand-matched for superior balance, are configured in a complementary active-load cascoded feedback arrangement. Heat shrink tubing applied around each critical input pair ensures superior thermal tracking.

Designed to reduce distortion, this arrangement not only ensures exceptionally linear response, but also superior bandwidth and superb amplifier reliability.

P Series amplifiers are the cleanest, quietest amplifiers in the industry. Each amplifier channel features two separate and autonomous power supplies fed from separate transformer windings. The amplifiers are thus able to deliver stable, continuous power at maximum output, regardless of the number of channels being driven.

While some amplifiers tend to oscillate when driving lower impedance loads, the P2 and P5 remain perfectly stable under all conditions. If pushed into clipping, the proprietary anti-saturation tracking power supply circuit takes over to ensure a seamless recovery.

Since the use of a regulated power supply in the driver stage removes noise emitted by the bridge rectifier (often heard as an audible hum at 120 Hz and its harmonics), the P2 and P5 achieve an utterly silent noise floor.

Conservatively rated, in a low-profile design, these low-impedance toroidal power supplies—one per amplifier channel—make no sacrifices when it comes to delivering a continuous supply of pure, clean low noise power.

They are shaped to minimize hum while a sequence-controlled soft turn on significantly reduces power line transients and in-rush current during start up, thereby preventing accidental tripping of the circuit breakers.

Fourteen Bipolar output Devices Per Channel

An amplifier’s ultimate performance is directly related to the number of high-quality, high-current devices used in the output stage. The greater the number of devices employed per channel, the greater the available power to deliver the crescendos in music and the thunder and explosions in movies. And the greater the amount of current that can be held in reserve.

While some manufacturers cut corners to save costs in this area, our designers incorporated fourteen bipolar output devices per channel. This results in tremendous current held in reserve.

Our two-layer military-spec (FR-4-rated) glass-epoxy circuit boards feature plated through-holes and 2-ounce copper traces, promoting excellent conductivity.

Extensive use of power and ground planes ensures exceptionally low noise and increased protection from stray electromagnetic energy— internally as well as externally from other devices.

P2 and P5 amplifiers are Direct-Connected to the power supply capacitor bank. This keeps output impedance remarkably low while making more power available to the amplifier. Even when driving lower- or complex impedance loads, the result is audibly superior performance. If an output short circuit does occur, only the AC line breaker will trip—there are no fuses to replace.

The standby low-power supply is protected by self-resetting Positive Temperature coefficient thermistors (PTCs). Once the condition that tripped the PTC disappears, the circuit restores itself automatically.

Our custom-designed binding posts are easy to use, ensure full power delivery at all times and facilitate large speaker cable connectors.

P2 and P5 amplifiers can be powered On/Off three ways: Manually, with the On/Off switch on the front panel; Remotely, via the 12-volt trigger input on the rear panel; Automatically, with our patented Auto-On/Off circuit. Auto-On turns the amplifier on when it senses an input signal and turns off 20 minutes after the input signal ends.

A three-way switch on the amplifier’s rear panel offers an RCA input, a professional quality XLR balanced input and an attenuated XLR balanced connection (for preamplifiers that require it). Gold-plated female RCA jacks and gold-plated XLR balanced connections provide the highest quality input connections.

With more than 1125 square inches (7258cm2) of computer modeled heatsink (including large serrated fins) per channel, P2 and P5 amplifiers are superbly equipped to dissipate the heat generated by their high power levels. This, in turn, eliminates the need for noise-inducing cooling fans. A thermal sensor on each heatsink continuously monitors safe operating temperature.

Fine-grain brushed aluminum cover and extruded aluminum handles. Heavy-gauge, low-resonance 12-awg steel chassis and oversize aluminum heatsinks generate serious high-end weight and authority.

IEC AC female sockets and detachable high-power, high-quality 14-awg AC power cords. Can be ordered with rack-mount handles.(See Dealer for more information.)

By design, P2 and P5 amplifiers are powerful independent “mono block” amplifiers. Each channel is self-contained on its own glass-epoxy circuit board and heatsink and benefits from an independent power supply. Since there is no common audio path between channels there is a complete absence of crosstalk.

Connector Type:

Power On Consumption (watts):

Signal to Noise Ratio:

Watts RMS per Channel (4-ohms):

Watts RMS per Channel (8-ohms):

Anthem® Statement P Series 2 Channel Power Amplifier

The STR Power Amplifier is the beating heart of a world-class 2-channel sound system. It delivers massive power generation, with audiophile-quality output in a smartly designed component.

Anthem® STR Series 2 Channel Power Amplifier

Cascoded complementary feedback input stage

Sixteen bipolar output devices per channel

Graphic front panel display for the power meter, status, and easy setup navigation

Inside, the STR Power Amplifier uses two colossal transformers and multiple high-current output devices so the most subtle details and dynamic peaks are handled equally well. Outside, its beautifully designed cosmetics, including a 7-inch graphic control display and secure, highly conductive audiophile connectors provide a perfect match to the STR Preamplifier.

Designed, engineered, and Crafted in Canada, the STR Power Amplifier delivers 400 Watts/channel into 8 ohms with both channels driven, a massive 600 Watts/channel into 4 ohms (both channels driven) and 800W in 2 ohms, for true no-holds-barred performance.

The STR Power Amplifier benefits from our proprietary input topology—a unique departure from the classic differential input stage. Eight low-noise bipolar input devices are configured in a complementary active-load cascoded feedback arrangement for reduced distortion, exceptionally linear response and superior bandwidth. Transistors in critical stages are hand-selected and matched for lowest possible distortion.

Sixteen Bipolar Output Devices Per Channel

Anthem engineers incorporated sixteen bipolar output devices per channel, resulting in peak production that is effortless and instantaneous, cinching even the most challenging material. The use of multiple bipolar output devices in class AB configuration also dramatically reduces distortion while ensuring extreme linearity, extensive bandwidth, and stress-free reliability.

Experience the immense dynamics of up to 800 clean watts delivered into demanding 2-ohm loads, or 400W into 8 ohms/600W into 4 ohms continuously and with both channels driven.

Conservatively rated, in a low-profile design shaped to minimize hum, the low-impedance toroidal power transformers — one for each channel — make no sacrifices when it comes to delivering a continuous supply of pure, clean, low noise power. As well, both the power supply impedance and internal cabling inductance are minimized to deliver a clear path for maximum power.

The amplifier channels are thus able to deliver stable, continuous power at maximum output without affecting one another, even when driving the lowest impedances. While some amplifiers oscillate or run out of power when driving lower impedance loads, the STR Power Amplifier remains perfectly stable under all conditions.

A sequence-controlled soft turn-on significantly reduces power line transients and in-rush current during start up, thereby preventing accidental tripping of circuit breakers.

The amplifier sections are Direct Connected to the power supply capacitor bank. This keeps output impedance remarkably low while making more power available to the amplifier. Even when driving lower or complex impedance loads, the result is audibly superior performance.

In addition to the traditional options for power-on, the STR Power Amplifier allows trigger mode and audio signal sensing to be combined so you would never need to think about turning the amplifier on or off manually. This can be useful when using a preamp with Home Theater Bypass mode together with a surround sound processor in the same system.

The STR Power Amplifier is designed, engineered and manufactured in Canada and is part of premium STR Series by Anthem, the leader in audio power and control.

Exclusive ALM™ technology monitors internal temperature, current and voltage to ensure safe and uninterrupted long-term operation. ALM is not in the signal path, so it never gets in the way. Instead, ALM engages instantly, but only in the most extreme circumstances, to protect your amplifier and speakers from damage, while lowering the chance of a line fuse blowing during an over-current condition. The front panel display confirms status at all times.

The STR Power Amplifier delivers incredible dynamics thanks to a massive, conservatively rated (and “audiophile approved”) power supply, designed with high rail voltages. The advanced-generation toroidal power transformers minimize stray magnetic field radiation and ensure ultra-quiet performance. The resulting power is pure, clean, low-noise; capable of effortlessly and instantly reproducing the full dynamics of even the most complex audio recordings.

Anthem STR Power Amplifiers are designed, engineered, and Crafted in Canada. From the idea stage to the final manufacturing specs, we have complete control over the whole intricate process. We take pride in this personal attention to detail, and use only the highest quality components, many designed and engineered in-house, in each new STR Power Amplifier we hand-build for your enjoyment.

Big power demands big connections, and our custom-designed oversized five-way binding posts give you the flexibility you need for even large-gauge bare-wire connections. Insulated, non-conductive, color-coded jackets make easy, fast, and solid connections with no interference or ghosting.

Anthem amplifiers go where other amplifiers fear to tread, with a well-earned reputation for being incredibly stable under difficult, low-impedance speaker loads. Short path design and redundant systems (with Advanced Load Monitoring and other exclusive protective technologies) ensure that peaks are surmounted effortlessly, guaranteeing a long life of high performance.

THD (400 W)

ITU-R (19 kHz + 20 kHz)

SMPTE (60 Hz + 7 kHz)

SNR (IEC-A, ref. 400 W)

Frequency Response (20 Hz - 20 kHz)

Power Bandwidth (-3 dB at 400 W into 8 ohms)

Slew Rate

Damping Factor (20 Hz - 1 kHz)

Channel Separation

Input Sensitivity (for 400W into 8Ω)

Voltage Gain

120 V version

220-240 V version

Standby

Idle

Typical Playback Levels

High Playback Levels

Height

Width

Depth (Not Including Power Cord)

Weight (Unpacked)

Anthem® STR Series SIlver 2 Channel Power Amplifier

<avb-footer>  <avb-designer-footer data-id="2" class="avb-typography dsg-tools-fill-light dsg-footer-2"> <div class="avb-grid avb-grid--container"> <div class="avb-grid__column avb-grid__column--large-6 dsg-footer-2__container-left"> <div class="avb-grid avb-grid--container"> <div class="avb-grid__column avb-grid__column--medium-6 avb-grid__column--marginBottom">  <ul class="avb-list avb-list--noBullet dsg-footer-2__menu">  <avb-categories> <template> <li data-for="category-item" class="avb-list__item dsg-footer-2__menu-item"> <avb-link data-for="category-item-link" class="dsg-tools-ff-primary dsg-tools-fw-bold dsg-tools-color-dark dsg-footer-2__link dsg-footer-2__heading"> Category name </avb-link> </li> </template> </avb-categories>   <li class="avb-list__item dsg-footer-2__menu-item"> <avb-link class="dsg-tools-ff-primary dsg-tools-fw-bold dsg-tools-color-dark dsg-footer-2__link dsg-footer-2__heading" data-href="https://www.bghe.com/residential-solutions"> Residential&nbsp;Solutions </avb-link> </li>  <li class="avb-list__item dsg-footer-2__menu-item"> <avb-link class="dsg-tools-ff-primary dsg-tools-fw-bold dsg-tools-color-dark dsg-footer-2__link dsg-footer-2__heading" data-href="https://www.bghe.com/commercial-solutions"> Commercial&nbsp;Solutions </avb-link> </li>   </ul> </div> <div class="avb-grid__column avb-grid__column--medium-6 avb-grid__column--marginBottom dsg-footer-2-border-left"> <div class="avb-grid avb-grid--container"> <div class="avb-grid__column avb-grid__column--small-12 avb-grid__column--marginBottom"> <div class="avb-wrapper">  <h2 class="avb-typography__heading dsg-tools-ff-primary dsg-tools-color-dark dsg-tools-fw-bold dsg-footer-2__heading"> Info </h2>  <ul class="avb-list avb-list--noBullet dsg-footer-2__menu">  <li class="avb-list__item dsg-footer-2__menu-item"> <avb-link class="dsg-tools-ff-secondary dsg-tools-fw-light dsg-tools-color-dark dsg-footer-2__link" data-href="https://www.bghe.com/our-process"> Our Process </avb-link> </li>  <li class="avb-list__item dsg-footer-2__menu-item"> <avb-link class="dsg-tools-ff-secondary dsg-tools-fw-light dsg-tools-color-dark dsg-footer-2__link" data-href="https://www.bghe.com/our-brands"> Our Brands </avb-link> </li>    <li class="avb-list__item dsg-footer-2__menu-item"> <avb-link class="dsg-tools-ff-secondary dsg-tools-fw-light dsg-tools-color-dark dsg-footer-2__link" data-href="https://www.bghe.com/about-us"> About Us </avb-link> </li>  <li class="avb-list__item dsg-footer-2__menu-item"> <avb-link class="dsg-tools-ff-secondary dsg-tools-fw-light dsg-tools-color-dark dsg-footer-2__link" data-href="https://www.bghe.com/careers"> Careers </avb-link> </li>  <li class="avb-list__item dsg-footer-2__menu-item"> <avb-link class="dsg-tools-ff-secondary dsg-tools-fw-light dsg-tools-color-dark dsg-footer-2__link" data-href="https://www.bghe.com/blog"> Blog </avb-link> </li> </ul> </div> </div> </div> </div> </div> </div> <div class="avb-grid__column avb-grid__column--large-6 dsg-footer-2__container-right"> <div class="avb-grid avb-grid--container"> <div class="avb-grid__column avb-grid__column--medium-6 avb-grid__column--marginBottom dsg-footer-2-border-left"> <div class="avb-grid avb-grid--container"> <div class="avb-grid__column avb-grid__column--small-12 avb-grid__column--marginBottom"> <div class="avb-wrapper">  <h2 class="avb-typography__heading dsg-tools-ff-primary dsg-tools-color-dark dsg-tools-fw-bold dsg-footer-2__heading"> Contact Us </h2>  <div class="avb-wrapper dsg-footer-2__location">  <div class="avb-typography__paragraph dsg-tools-ff-secondary dsg-tools-fw-light dsg-tools-color-dark dsg-footer-2__text"> <avb-link class="dsg-footer-2__link" data-href="https://www.google.com/maps/dir//Blue+Grass+Home+Entertainment+1047+Contract+St+Lexington,+KY+40505/@38.051059,-84.4613018,16z/data=!4m5!4m4!1m0!1m2!1m1!1s0x8842450d12b11259:0xf8826b6a904bacbb" target="_blank"> <p class="dsg-footer-2__address-line"> 1047 Contract&nbsp;St. </p> <p class="dsg-footer-2__address-line"> Lexington, KY 40505 </p> </avb-link> </div>  <ul class="avb-list avb-list--noBullet dsg-tools-ff-secondary dsg-tools-fw-light dsg-tools-color-dark dsg-footer-2__text">  <li class="avb-list__item"> Phone: <avb-link class="dsg-footer-2__link" data-href="tel:859-253-3454"> 859-253-3454 </avb-link> </li>  <li class="avb-list__item"> Email: <avb-link class="dsg-footer-2__link" data-href="mailto: info@bghe.com" target="_blank"> info@bghe.com </avb-link> </li> </ul> </div> </div> </div> <div class="avb-grid__column avb-grid__column--small-12 avb-grid__column--marginBottom"> <div class="avb-wrapper">  <ul class="avb-list avb-list--noBullet dsg-tools-ff-secondary dsg-tools-fw-light dsg-tools-color-dark dsg-footer-2__text"> <li class="avb-list__item"> Monday - Friday: 8:00 AM - 6:00&nbsp;PM </li> <li class="avb-list__item"> Saturday: Appointment Only </li> <li class="avb-list__item"> Sunday &amp; Major Holidays:&nbsp;Closed </li> </ul> </div> </div> </div> </div> <div class="avb-grid__column avb-grid__column--medium-6 avb-grid__column--marginBottom dsg-footer-2-border-left">  <h2 class="avb-typography__heading dsg-tools-ff-primary dsg-tools-color-dark dsg-tools-fw-bold dsg-footer-2__heading"> Connect with&nbsp;Us </h2>  <ul class="avb-list avb-list--horizontal dsg-tools-ff-primary dsg-tools-fw-light">  <li class="avb-list__item"> <avb-link class="dsg-footer-2__link" data-href="https://www.facebook.com/BGHELexington" target="_blank"> <span class="fab fa-facebook-f dsg-footer-2-social-icon"></span> </avb-link> </li>  <li class="avb-list__item"> <avb-link class="dsg-footer-2__link" data-href="https://www.instagram.com/bghomeentertainment/?hl=en" target="_blank"> <span class="fab fa-instagram dsg-footer-2-social-icon"></span> </avb-link> </li>  <li class="avb-list__item"> <avb-link class="dsg-footer-2__link" data-href="https://www.youtube.com/channel/UC1g0sv1Bvcu6nPQIqaSKK2g" target="_blank"> <span class="fab fa-youtube dsg-footer-2-social-icon"></span> </avb-link> </li> </ul>  <h2 class="avb-typography__heading dsg-tools-ff-primary dsg-tools-color-dark dsg-tools-fw-bold dsg-footer-2__heading"> Associations </h2>  <ul class="avb-list avb-list--horizontal dsg-footer-2-list"> <li class="avb-list__item dsg-footer-2-list-item"> <img class="dsg-footer-2-image" src="https://d12mivgeuoigbq.cloudfront.net/magento-media/promotions/responsive-banners/logos/logo-cedia.png" alt="CEDIA logo"> </li> <li class="avb-list__item dsg-footer-2-list-item"> <img class="dsg-footer-2-image" src="https://d12mivgeuoigbq.cloudfront.net/magento-media/promotions/responsive-banners/logos/logo-prosource_black.png" alt="ProSource logo"> </li> <li class="avb-list__item dsg-footer-2-list-item"> <img class="dsg-footer-2-image" src="https://d12mivgeuoigbq.cloudfront.net/magento-media/members-prosource/vblu1-blue-grass-home-entertainment/logo-kentucky-coc.png" alt="Kentucky Chamber of Commerce logo"> </li> <li class="avb-list__item dsg-footer-2-list-item"> <img class="dsg-footer-2-image" src="https://d12mivgeuoigbq.cloudfront.net/magento-media/members-prosource/vblu1-blue-grass-home-entertainment/logo-bia-kentucky-dark.png" alt="Kentucky BIA logo"> </li> <li class="avb-list__item dsg-footer-2-list-item"> <img class="dsg-footer-2-image-smaller" src="https://d12mivgeuoigbq.cloudfront.net/magento-media/members-prosource/vblu1-blue-grass-home-entertainment/logo-ist-blk.png" alt="IST logo"> </li> </ul> </div> </div> </div> </div> </avb-designer-footer>  <avb-designer-footer data-id="3" class="avb-typography dsg-tools-color-light dsg-tools-ff-secondary dsg-tools-fw-light dsg-tools-fill-dark dsg-footer-3"> Blue Grass Home Entertainment Copyright 2023 </avb-designer-footer> </avb-footer> <style> /* ==================== Footer links and information (footer-2) ==================== */ .dsg-footer-2 { padding: 0 1rem 3rem; } .dsg-footer-2__heading { font-size: 1.1em; } .dsg-footer-2__link, .dsg-footer-2__link:visited, .dsg-footer-2__link:focus { } .dsg-footer-2__link:hover { color: #fab814; } .dsg-footer-2-list { margin-top: -1rem; justify-content: left; align-items: center; } .dsg-footer-2-list-item { width: 26%; } .dsg-footer-2-image { -webkit-filter: grayscale(100%); /* Safari 6.0 - 9.0 */ filter: grayscale(100%); padding-top: 1em; width: 6rem; } .dsg-footer-2-image-smaller { -webkit-filter: grayscale(100%); /* Safari 6.0 - 9.0 */ filter: grayscale(100%); padding-top: 1em; width: 4rem; } .dsg-footer-2__container-left { padding-top: 1rem; } .dsg-footer-2__container-right { padding-right: .25rem; padding-left: .25rem; } .dsg-footer-2-border-left { border-left: none; padding-left: .25rem; padding-right: .25rem; } .dsg-footer-2-icon { font-size: 1.4rem; padding: 0 .5rem 0 0; } .dsg-footer-2-social-icon { font-size: 1.4rem; padding: 0 .5rem 0 0; } .dsg-footer-2-social-icon:hover { background: -webkit-gradient(linear, left top, left bottom, from(#fab814), to(#fab814)); -webkit-background-clip: text; -webkit-text-fill-color: transparent; } @media screen and (min-width: 600px) { .dsg-footer-2-list-item { width: 12%; } } @media screen and (min-width: 960px) { .dsg-footer-2-list-item { width: 15%; } } @media screen and (min-width: 1280px) { .dsg-footer-2 { padding: 0 1rem 3rem; background-image: none; background-position: top left; background-size: cover; } .dsg-footer-2__container-left { max-width: 40%; flex: 0 0 40%; padding-top: 3rem; } .dsg-footer-2__container-right { max-width: 60%; flex: 0 0 60%; padding-top: 3rem; padding-left: 0; } .dsg-footer-2-border-left { border-left: 1px solid #1C1C1C; padding-left: 2.5em; min-height: 18rem; } .dsg-footer-2-list-item { width: 24%; } } @media screen and (min-width: 1600px) { .dsg-footer-2 { padding: 0 1rem 3rem; } .dsg-footer-2-list-item { width: 32%; margin-right: 0; } } /* ==================== Footer copyright (footer-3) ==================== */ .dsg-footer-3 { padding: 2rem 1rem; text-align: center; } </style>

Power Amplifiers

Anthem® MCA 225 Gen 2 2 Channel Power Amplifier

$2,299.99

Anthem® MCA 225 Gen 2 Black 2 Channel Power Amplifier

$2,199.99

Anthem® MCA 325 Gen 2 3 Channel Power Amplifier

$2,699.99

Anthem® MCA 325 Gen 2 Black 3 Channel Power Amplifier

$2,599.99

Anthem® MCA 525 GEN 2 5 Channel Power Amplifier

$3,799.99

Anthem® MCA 525 GEN 2 Black 5 Channel Power Amplifier

$3,699.99

Anthem® Statement P Series 2 Channel Power Amplifier

$4,999.99

Anthem® Statement P Series 5 Channel Power Amplifier

$8,999.99

Anthem® Statement P Series 5 Channel Power Amplifier

$8,999.99

Anthem® STR Series 2 Channel Power Amplifier

$6,499.99

Anthem® STR Series SIlver 2 Channel Power Amplifier

$6,499.99

Klipsch® KA-1000-THX Subwoofer Amplifier

$2,299.00

Klipsch® KDA Series KDA-500 DSP Amplifier

$1,269.00

Klipsch® KDA Series KDA-1000 DSP Amplifier

$1,899.00

Origin Acoustics® Power Amplifier

$1,410.00

Origin Acoustics® Power Amplifier

$1,000.00

Info

Contact Us

Connect with Us

Associations